Hardware
Hardware

When it comes to data, more is, in fact, more.

That’s why we install a network of sensors that measure the air inside and out with hyper-accuracy, connecting to a sleek, modern panel that withstands extreme heat and cold. It makes S2 the most sensitive & customizable energy control system, ever.

Hardware
Boiler room Sensors

Smart boiler rooms

We’ll design a smart boiler room for your building for maximum efficiency and control.

Water Meter Sensor

Registers water volume added to the boiler and generates alert if gallon count is high (potential leak) or low (potential corrosion).

Burner Flame Modulation

Controls the burner output (flame size) to match boiler variables for correct fuel-to-air ratios. DEP-approved.

Coil Sensor

Measures the temp of the coil to determine hot water settings, and generates an alert if there are any diagnostic concerns with the coil, such as mineral buildup.

Mix Sensor

Ensures that the mixing valve is working properly by tracking the hot water sent to tenants to ensure that the temp range meets legal requirements.

Aqua Sensor

Measures the temperature of water in the boiler, enabling hot water control and helping to determine if pressure is built.

Pressure Sensor

Measures and displays boiler pressure PSI to identify faulty steam pressure.

High Temp Stack Sensor

Determines the temperature of the flue, or exhaust heat, and generates alerts if the temp is high.

S2

S2 is the #1 temperature control system that gives you precision-perfect control of your building’s heating, cooling, and more.

Return Sensor

Measures the temp of water returning to the boiler and provides temperature reading and setpoint, letting you know that heat is circulating properly.

Additional components

  • Supply Sensor

    Controls hydronic heating systems by monitoring the temperature of the water leaving the boiler.

  • Pump Runtime

    Shows when the pump is running and can detect pump failure. Compatible with hydronic heating systems.

  • Smoke Alarm & Siren

    Detects smoke, carbon monoxide, or natural gas, and if any are present, sounds an audible onsite alarm and generates an alert.

  • Oil/Gas Indicator

    For Dual Fuel Burners: Displays whether the boiler is running on oil or gas, and generates an alert if fuel type is changed.

  • Exhaust Fan Control

    Controls exhaust fan to ensure boiler room does not overheat.

  • Vacuum Pump Control

    Controls the vacuum pump — and gives you eyes on the inside. The vacuum pump control allows the heat to continue circulating through the building following a boiler cycle.

  • Flame Failure Sensor

    Why is your boiler down? The Flame Failure Sensor detects boiler flame failure and generates an alert, so you can keep a finger on the pulse.

  • Flood Sensor & Siren

    Detects leaks and flooding in boiler areas, then sounds an audible onsite alarm and generates an alert to prevent water damage & flooding.

Building sensors

Smart sensors everywhere.

Right zone, left zone: Our technicians will analyze the energy distribution in your building to determine what gets put where.

Cooling Tower

Determines the pump speed for precision cooling with optimal fan speed.

Roof Access Alarm

Detects unauthorized roof access, then sounds an audible onsite alarm and generates an alert for armed and alarm mode. Can be disabled via remote control provided to onsite personnel.

Indoor Space Sensor

In-unit sensors that communicate via radio frequency to provide accurate heat data. Usually placed throughout top floor units, but can be added to every apartment for enhanced control.

Indoor Space Sensor

In-unit sensors that communicate via radio frequency to provide accurate heat data. Usually placed throughout top floor units, but can be added to every apartment for enhanced control.

Indoor Space Sensor

In-unit sensors that communicate via radio frequency to provide accurate heat data. Usually placed throughout top floor units, but can be added to every apartment for enhanced control.

Boiler Room

The boiler room is the heart of your temperature control operation. It’s where the equipment is housed and the Stealth sensors do their thing, giving you total control of your heating and cooling systems to ensure optimal performance.

Outdoor Sensor

Combined with data from apartment sensors + local weather forecast to trigger a heat run based on temp thresholds.

THE S2 PANEL
Looks sleek. Acts tough.

The S2 panel can withstand extreme heat, cold, and flooding — so no matter what your boiler goes through, it will survive!

10 inch (versus 7 inch) touch panel display
Built-in power supply
Cap-touch off, auto, & manual buttons
Built-in internet
Reconfigured PCBS Printed Circuit Board
Direct 0-10V and 4-20mA connections, & thermistor (stack) connection

Connects with every heating and cooling system out there.

The S2 has the most integrations on the market.
Compatible Heating & Cooling Systems:

  • 3 Way Valve
  • Hydronic Boiler
  • Chillers
  • Hydronic Multi Zone
  • Chilling & Cooling Towers
  • Steam Boiler
  • High Efficiency Boiler
  • Valve
SMART INTEGRATIONS

Smart knows smart.

Get the most out of the S2 suite when you integrate it with your smart boilers, chillers, thermostats and more.

View all integrations

Want to get technical? Download specifications for hardware components.

Download manuals

Find more energy resources

Resource Blog

Resource Blog

Learn about local energy laws, cutting-edge new developments, and more

Learn More
Resource Blog

How-to Videos

Master the S2 platform and gain useful tips and tricks

Watch now
Resource Blog

Case Studies

Learn how others have conquered their heat and capitalized on S2

Read More

The world’s smartest
boiler control system
pays for itself in under
a year.

32,435.00 $ $50,000 Target